Introduction
Lathyrus sativus, also known as grass pea, cicerchia, blue sweet pea, chickling pea, chickling vetch, Indian pea, white pea and white vetch, is a legume (family Fabaceae) commonly grown for human consumption and livestock feed in Asia and East Africa. It is a particularly important crop in areas that are prone to drought and famine, and is thought of as an ‘insurance crop’ as it produces reliable yields when all other crops fail.
The edible Lathyrus sativus originated in the West Central Asia Mediterranean region and North India was its centre of domestication. The states which cultivate lathyrus are Maharashtra, Madhya Pradesh, Bihar, West Bengal and Eastern Uttar Pradesh contributing about 4.5% total pulse production of the country. In Maharashtra it is cultivated in Bhandara, Chandrapur, Gadchiroli, Gondia and Nagpur districts of eastern Vidarbha.
Zinc sulphate is the inorganic compound with equation ZnSO4. It was generally known as “white vitriol”. It is a powder that is colourless and totally water soluble. It is a fundamental part of catalysts engaged with metabolic reaction. Zinc sulphate is most ordinarily utilized source of zinc in granular fertilizer due to its high solubility in water and it is relatively low cost of production. They are responsible for use in a wide range of soils. It influences a few biochemical cycles in the plant, like cytochrome and nucleotide synthesis, chlorophyll production, enzyme activation, membrane integrity and hormone regulation (e.g., Tryptophan synthesis, a precursor of IAA). Sulphur assumes urgent part in controlling metabolic and enzymatic cycles including photosynthesis, respiration and legume rhizobium symbiotic nitrogen fixation, energy transformation, activation of enzymes and also in carbohydrate metabolism which reflected in expanded yield [1].
Potassium is known to be taken up by plant roots at high rates and is quickly transported to the upper plant parts. The downward transport of K from tops to roots is also a rapid process, so that once K is absorbed, it is readily distributed throughout the entire plant. K is taken up from the soil solution by root epidermal and cortical cells. Once K is inside the root symplast, it may be sorted in vacuoles, where it fulfills osmotic functions, or is transported to the shoot via xylem [2].
Methodology
The project entitled “influence of zinc sulphate and potassium nitrate on morpho-physiological parameters, yield and yield contributes of lathyrus” was conducted during rabi season 2021-22 at research farm of Botany Section College of Agriculture, Nagpur in a Randomized Block Design with nine treatments and three replications. Treatment consists of T1 (control), T2 (ZnSO4 0.25%), T3 (ZnSO4 0.50%), T4 (ZnSO4 0.75%), T5 (ZnSO4 1.0%), T6 (KNO3 0.20%), T7 (KNO3 0.40%), T8 (KNO3 0.60%) and T9 (KNO3 0.80%) were tested. The gross plot size was 2.70 m x 2.20 m and net plot size was 2.10 m x 2.00 m with spacing of 30 cm x 10 cm. Five plants from each plot were selected randomly and data were collected at 25, 45 and 65 DAS on plant height, number of branches, total dry matter production and leaf area were calculated. Test weight, number pods, grain yield plant-1, plot-1, ha-1, harvest index were calculated after harvest. Data was estimated by statistical analysis as per method suggested by Panse and Sukhatme [3].
Results and Discussion
Plant Height
The data regarding the plant height at 25 DAS were found statistically significant. At 25 DAS the range of plant height was recorded 7.08 – 9.54 cm. Significantly maximum plant height was registered in treatment T9 (KNO3 0.80%) followed by treatments T8 (KNO3 0.60%), T5 (ZnSO4 1.0%), T4 (ZnSO4 0.75%), T7 (KNO3 0.40%) and T6 (KNO3 0.20%) over control and rest of the treatments. Whereas the treatments T3 (ZnSO4 0.50%) and T2 (ZnSO4 0.25%) in descending order also found significantly superior over treatments over T1 control.
At 45 DAS the range of plant height was recorded 17.06 – 25.22 cm. At this stage significantly highest plant height was noticed in plant exposed to the treatment T9 (KNO3 0.80%) followed by treatments T8 (KNO3 0.60%), T5 (ZnSO4 1.0%), T4 (ZnSO4 0.75%), T7 (KNO3 0.40%) and T6 (KNO3 0.20%) over control (T1). Next to these treatments significantly more plant height was also recorded in treatments T3 (ZnSO4 0.50%) and T2 (ZnSO4 0.25%) were found at par with control.
At 65 DAS the range of plant height was observed 34.11 – 52.69 cm. The significantly superior plant height was registered in treatment T9 (KNO3 0.80%) followed by treatments T8 (KNO3 0.60%), T5 (ZnSO4 1.0%), T4 (ZnSO4 0.75%), T7 (KNO3 0.40%) and T6 (KNO3 0.20%), over control and rest of the treatments. Whereas the treatments T3 (ZnSO4 0.50%) and T2 (ZnSO4 0.25%) were found significant over treatment T1 control.
Similar results were observed by [4] examined the effect of zinc as a foliar application on chickpea and recorded significant increase in plant height by the application of 0.5% ZnSO4. [5] Observed that influence of ferrous sulphate and zinc sulphate on morpho-physiological parameters and yield in chickpea and recorded maximum height in 0.5% ZnSO4. Almost similar results were reported by [6], [7] that effect of potassium level on performance of chickpea and recorded maximum height in level 90 kg potassium ha-1. Whereas, [8] observed that the foliar application of KNO3 @ 2% showed maximum plant height.
Number of Branch
At 25 DAS data recorded about number of branches plant-1 was statistically significant. At 25 DAS range of number of branches plant-1 recorded was 3.35 – 4.62. Significantly highest number of branches plant-1 was recorded in treatment T9 (KNO3 0.80%) followed by treatments T8 (KNO3 0.60%), T5 (ZnSO4 1.0%), T4 (ZnSO4 0.75%) and T7 (KNO3 0.40%) and over control and rest of the treatments. Whereas the treatments T6 (KNO3 0.20%), T3 (ZnSO4 0.50%) and T2 (ZnSO4 0.25%) were found at par with control.
At 45 DAS range of number of branches plant-1 recorded was 5.23 – 7.28. At 45 DAS significantly highest number of branches plant-1 was observed in treatment T9 (KNO3 0.80%) followed by treatments T8 (KNO3 0.60%), T5 (ZnSO4 1.0%) and T4 (ZnSO4 0.75%) as compared with control (T1). Next to these treatments significantly more plant height was also recorded in treatments T7 (KNO3 0.40%), T6 (KNO3 0.20%) T3 (ZnSO4 0.50%) and T2 (ZnSO4 0.25%) were found at par with control.
At 65 DAS range of number of branches plant-1 recorded was 6.05 – 9.02. At 65 DAS significantly maximum number of branches plant-1 was registered in treatment T9 (RDF + KNO3 0.80%) followed by treatments T8 (KNO3 0.60%), T5 (ZnSO4 1.0%), T4 (ZnSO4 0.75%), T7 (KNO3 0.40%), T6 (KNO3 0.20%) and T3 (ZnSO4 0.50%) over control and rest of the treatments. But, treatment T2 (ZnSO4 0.25%) were found at par with control.
The marked superiority in growth parameters like branches observed due to potassium which enhances plant vigour and strengthens the stalk.
[8] Investigate the response of different potassium application rates on growth, yield, carbohydrates and protein content of mungbean. K4 (0.5g /pot) significantly enhanced the number of branches plant-1 in mungbean. Whereas [9] revealed that the foliar spray of KNO3 (2%) enhanced the number of branches plant-1 in lentil. Almost similar results were reported by [6], [7] that effect of potassium level on performance of chickpea and recorded maximum number of branches plant-1 in level 90 kg potassium ha-1. However, [5] observed that influence of ferrous sulphate and zinc sulphate on morpho-physiological parameters and yield in chickpea and recorded maximum number of branches plant-1 in 0.5% ZnSO4.
Total Dry Matter Production
Scrutiny of the data revealed marked effect of foliar spray of ZnSO4 and KNO3 on the total dry matter production of lathyrus at 25, 45 and 65 DAS.
The data recorded about the total dry matter production were found statistically significant at 25 DAS. The range of dry matter production recorded was 0.44 – 0.75 g. Significantly maximum dry matter production was noticed in treatment T9 (KNO3 0.80%) followed by treatments T8 (KNO3 0.60%), T5 (ZnSO4 1.0%), T4 (ZnSO4 0.75%) T7 (KNO3 0.40%) and T6 (KNO3 0.20%) when compared with treatment T1 (control). Next to these treatments significantly more dry matter production was also recorded in treatments T3 (ZnSO4 0.50%) and T2 (ZnSO4 0.25%) were found at par with control.
At 45 DAS the range of total dry matter production recorded was 1.35 – 1.78 g. Significantly maximum dry matter production was registered in treatment T9 (KNO3 0.80%) followed by treatments T8 (KNO3 0.60%), T5 (ZnSO4 1.0%), T4 (ZnSO4 0.75%) T7 (KNO3 0.40%) and T6 (KNO3 0.20%), over control and rest of the treatments. Next to these treatments significantly more dry matter production was also recorded in treatments T3 (ZnSO4 0.50%) and T2 (ZnSO4 0.25%) were found at par with control.
At 65 DAS the range of total dry matter production recorded was 4.45 – 6.66 g. Significantly maximum dry matter production was registered in treatment T9 (KNO3 0.80%) followed by treatments T8 (KNO3 0.60%), T5 (ZnSO4 1.0%), T4 (ZnSO4 0.75%) T7 (KNO3 0.40%), T6 (KNO3 0.20%) and T3 (ZnSO4 0.50%) over control. Next to these treatments significantly more dry matter production was also noticed in treatments and T2 (ZnSO4 0.25%) were found at par with control.
Similar results recorded by [9] who revealed that the foliar spray of KNO3 (2%) enhanced the dry matter production in lentil. Whereas [10] who reported that application of foliar application of ZnSO4 0.5% was found more effective in increasing the total dry matter production, when compared with control in lathyrus. Also [5] observed that influence of ferrous sulphate and zinc sulphate on morpho-physiological parameters and yield in chickpea and recorded maximum total dry matter production in 0.5% ZnSO4. Almost similar results were reported by [6], [7] that effect of potassium level on performance of chickpea and recorded increased total dry matter production in level 90 kg potassium ha-1.
Leaf Area Plant-1
Data pertaining to leaf area plant-1 at 25, 45 and 65 DAS as influenced by different treatments was tabulated in Table 1. Leaf area plant-1 gradually increased from 20 DAS and reached maximum value at 60 DAS in all the treatments.
Observations recorded at 25 DAS indicated significant variation. At 25 DAS the range of leaf area plant-1 recorded was 0.55 – 0.81 dm2. The most pronounced effect observed in plant exposed to the treatment T9 (KNO3 0.80%) followed by treatments T8 (KNO3 0.60%), T5 (ZnSO4 1.0%), T4 (ZnSO4 0.75%), T7 (KNO3 0.40%) and T6 (KNO3 0.20%), in leaf area over control and rest of the treatments under study. Next to these treatments significantly more leaf area was also recorded in treatments T3 (ZnSO4 0.50%) and T2 (ZnSO4 0.25%) were found at par with control.
At 45 DAS the range leaf area plant-1 recorded was 1.39 – 1.80 dm2. The significantly highest leaf area over control was observed at 45 DAS in treatment T9 (KNO3 0.80%) followed by treatments T8 (KNO3 0.60%), T5 (ZnSO4 1.0%), T4 (ZnSO4 0.75%), T7 (KNO3 0.40%) and T6 (KNO3 0.20%) in a descending manner. But treatments T3 (ZnSO4 0.50%) and T2 (ZnSO4 0.25%) were found at par with control.
At 65 DAS the range of leaf area plant-1 recorded was 3.22 – 4.57 dm2. At 65 DAS significantly highest leaf area was registered in treatment T9 (KNO3 0.80%) followed by treatments T8 (KNO3 0.60%), T5 (ZnSO4 1.0%), T4 (ZnSO4 0.75%), T7 (KNO3 0.40%) and T6 (KNO3 0.20%) over control and rest of the treatments under study. Next to these treatments significantly more leaf area was also recorded in a treatment T3 (ZnSO4 0.50%) and T2 (ZnSO4 0.25%) were found at par with control.
Similar results were reported by [11] studied the effect of Zinc and Iron fortification on growth, pod yield, zinc uptake of groundnut genotypes. The application of 0.5% ZnSO4 significantly leaf area at harvest. Whereas [12], who reported that application of RDF + foliar application of ZnSO4 0.5% was found more effective in enhancing leaf area, when compared with control in lathyrus. Our results are in line with that of [4], who observed that foliar application of 0.5% zinc significantly enhanced leaf area over control in chickpea. Also [5] observed that influence of ferrous sulphate and zinc sulphate on morpho-physiological parameters and yield in chickpea and recorded maximum leaf area plant-1 in 0.5% ZnSO4.
Test Weight
The range of test weight recorded after harvest was 2.70–3.86 g. Significantly highest test weight content was found in T9 KNO3 @ 0.80% (3.86 g).
Application of zinc sulphate and potassium nitrate as foliar spray increased the seed weight due to movement of nutrients in plants for redistribution of minerals to the grains, extend the grain filling period leading to improvement in grain weight.
According to results of [12], who studied the influence of zinc and iron on morpho-physiological parameters and yield of lathyrus (Lathyrus sativus L.) and stated that application of ZnSO4 0.5% foliar spray at 25 and 40 DAS recorded highest test weight over control. However, [13] observed that the foliar application of 0.5% KNO3 showed highest test weight in wheat. Almost similar results were reported by [6], [7] that effect of potassium level on performance of chickpea and recorded maximum weight of 100 seeds in level 90 kg potassium ha-1. Whereas, [8] observed that the foliar application of 2% KNO3 showed that the significantly highest number of grain plant-1 and weight of 1000 seeds in wheat.
Number of Pod Plant-1
At harvest the range of number of pod plant-1 was observed in the range of 60.15–78.33. Significantly highest number of pod was found in T9 KNO3 @ 0.80% (78.33) followed by T8 KNO3 @ 0.60% (75.67) and T7 ZnSO4 @ 1% (75). The significant increase in number of pods was observed due to spraying of zinc sulphate and potassium nitrate at 25, 45 and 65 DAS.
Results regarding number of pods plant-1 by [14] found that combined spraying of 0.5% ZnSO4 at 45 DAS recorded significantly higher pods plant-1 in cowpea. However, [15] recorded foliar spray of 0.5% Zn produced maximum number of pods plant-1 in chickpea. According to results of [12], who studied the influence of zinc and iron on morpho-physiological parameters and yield of lathyrus (Lathyrus sativus L.) and stated that application of ZnSO4 0.5% foliar spray at 25 and 40 DAS recorded highest number of pods plant-1 over control. Almost similar results were reported by [6], [7] that effect of potassium level on performance of chickpea and recorded maximum weight of 100 seeds and number of pods plant-1 in level 90 kg potassium ha-1. However, [7] observed that the foliar application of 2% KNO3 showed that the significantly highest number of grain plant-1 and weight of 1000 seeds in wheat.
Seed Yield Plant-1 (G), Plot-1 (Kg) and Ha-1 (Q)
Significantly maximum seed yield plant-1, plot-1 and hectare-1 were produced in treatment T9 KNO3 @ 0.80% followed by T8 KNO3 @ 0.60%, T7 ZnSO4 @ 1%, T6 (KNO3 0.20%), T3 (ZnSO4 0.50%) and T2 (ZnSO4 0.25%) over control.
The range of increase in seed yield plant-1, plot-1 and hectare-1 was 2.82 g, 0.44 kg and 10.55 q in treatment T1 (control) and 4.28 g, 0.68 kg and 16.26 q in treatment T9 KNO3 @ 0.80% respectively. The above finding was in corroboration with the findings of [16] observed foliar spray of KNO3 and ZnSO4 on yield ascribing characters of grass pea. Foliar spray of KNO3 at 0.50% during 50% flowering stage showed maximum values of length of pod, seeds pod-1 and 1000 seed weight; it was essentially better than water spray and unsprayed control. Whereas, [14] recorded that the foliar application of micronutrients like iron and zinc had significant influence on the yield of cowpea. 0.5% ZnSO4, at 45 DAS proved most effective and increased the seed yield by 43.09% when compared with control followed by combined spraying of 0.5% ZnSO4, at 25 DAS (40.14%). The net return and benefit:cost ratio also followed the same [17].
Morphophysiological Analysis
| Treatments | Plant Height Plant-1 | Number of Branches Plant-1 | Leaf Area Plant-1 | Total Dry Weight of Plant (G) | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 25 DAS | 45 DAS | 65 DAS | 25 DAS | 45 DAS | 65 DAS | 25 DAS | 45 DAS | 65 DAS | 25 DAS | 45 DAS | 65 DAS | |
| T1 CONTROL | 7.08 | 17.06 | 34.11 | 3.35 | 5.23 | 6.05 | 0.55 | 1.39 | 3.22 | 0.44 | 1.35 | 4.45 |
| T2 ZnSO4@0.25% | 8.82 | 22.66 | 47.84 | 3.76 | 5.65 | 7.22 | 0.62 | 1.53 | 3.77 | 0.47 | 1.50 | 4.93 |
| T3 ZnSO4@0.50% | 8.78 | 22.97 | 47.90 | 3.79 | 5.74 | 7.71 | 0.65 | 1.59 | 3.82 | 0.52 | 1.53 | 5.67 |
| T4 ZnSO4@0.75% | 9.05 | 23.75 | 48.57 | 4.20 | 6.45 | 8.53 | 0.72 | 1.71 | 4.33 | 0.69 | 1.66 | 6.33 |
| T5 ZnSO4@1% | 9.17 | 24.40 | 48.90 | 4.36 | 6.82 | 8.65 | 0.76 | 1.76 | 4.40 | 0.72 | 1.70 | 6.45 |
| T6 KNO3@0.20% | 8.83 | 23.43 | 48.04 | 3.83 | 5.80 | 8.12 | 0.67 | 1.61 | 3.88 | 0.59 | 1.57 | 5.78 |
| T7 KNO3@0.40% | 8.95 | 23.98 | 48.34 | 4.16 | 6.01 | 8.27 | 0.70 | 1.69 | 3.92 | 0.65 | 1.61 | 6.13 |
| T8 KNO3@0.60% | 9.32 | 24.82 | 50.00 | 4.53 | 7.18 | 8.87 | 0.79 | 1.78 | 4.49 | 0.73 | 1.73 | 6.59 |
| T9 KNO3@0.80% | 9.54 | 25.22 | 52.69 | 4.62 | 7.28 | 9.02 | 0.81 | 1.80 | 4.57 | 0.75 | 1.78 | 6.66 |
| SE(m) | 0.35 | 1.22 | 2.63 | 0.20 | 0.36 | 0.47 | 0.36 | 0.06 | 0.21 | 0.04 | 0.06 | 0.37 |
| CD | 1.07 | 3.66 | 7.90 | 0.62 | 1.10 | 1.42 | 0.10 | 0.20 | 0.63 | 0.12 | 0.19 | 1.12 |
| Treatments | Test Weight (G) | Number of Pod Plant-1 | Seed Yield Plant-1 (G) | Seed Yield Plot-1 (Kg) | Seed Yield Ha-1 (Q) | Harvest Index (%) |
|---|---|---|---|---|---|---|
| T1 CONTROL | 2.70 | 60.15 | 2.82 | 0.44 | 10.55 | 30.00 |
| T2 ZnSO4@0.25% | 2.80 | 67.00 | 2.90 | 0.46 | 11.36 | 31.77 |
| T3 ZnSO4@0.50% | 2.91 | 68.33 | 3.03 | 0.49 | 11.92 | 32.55 |
| T4 ZnSO4@0.75% | 3.53 | 74.37 | 3.92 | 0.60 | 13.31 | 34.01 |
| T5 ZnSO4@1% | 3.68 | 75.00 | 4.03 | 0.62 | 14.89 | 35.95 |
| T6 KNO3@0.20% | 2.99 | 70.98 | 3.33 | 0.51 | 12.06 | 32.81 |
| T7 KNO3@0.40% | 3.36 | 72.63 | 3.68 | 0.57 | 13.18 | 33.75 |
| T8 KNO3@0.60% | 3.73 | 75.67 | 4.18 | 0.66 | 15.63 | 37.01 |
| T9 KNO3@0.80% | 3.86 | 78.33 | 4.28 | 0.68 | 16.26 | 38.61 |
| SE(m) | 0.21 | 2.78 | 0.27 | 0.044 | 0.97 | 1.22 |
| CD | 0.65 | 8.36 | 0.83 | 0.13 | 2.90 | 3.68 |
However, [10] recorded foliar feeding of zinc sulphate at 0.5% individually and in their combinations. The foliar feeding at 25 and 35 DAS showed significantly increases the seed yield plot-1. [13] Observed that the foliar application of 0.5% KNO3 showed highest grain yield ha-1 and B:C ratio in wheat. Similar results were reported by [6], [7] that effect of potassium level on performance of chickpea and recorded maximum seed yield plant-1, seed yield ha-1 in level 90 kg potassium ha-1. Also [8] observed that the foliar application of 2% KNO3 showed the significantly highest number of grain plant-1, harvest index and B:C ratio in wheat [18].
Harvest Index
Harvest index was significantly increased and was highest in treatment T9 (KNO3 0.80%) followed by treatments T8 (KNO3 0.60%), T5 (ZnSO4 1.0%), T4 (ZnSO4 0.75%) and T7 (KNO3 0.40%) over control and rest of the treatments. But, treatments T6 (KNO3 0.20%), T3 (ZnSO4 0.50%) and T2 (ZnSO4 0.25%) found at par with treatment T1 (control). This might be due to the physiological index reflecting the percentage of assimilates mobilization from vegetative organs of plant into grains.
Above results are in agreement with the experimental studies of many scientists [13]. The effect of foliar application of potassium nitrate on late sown wheat in mitigating terminal heat stress revealed that the foliar application of 0.5% KNO3 showed highest number of grain plant-1, test weight, grain yield ha-1 and B:C ratio. Almost similar results were reported by [6], [7] that effect of potassium level on performance of chickpea and recorded highest harvest index in level 90 kg potassium ha-1.