Parameter optimization and performance analysis of a dual-axis rotary sugarcane de-trashing and feeding mechanism using DEM–RFC coupled simulation
Keywords:
Sugarcane Harvesting, De-Trashing Mechanism, Discrete Element Method, Rigid–Flexible Coupling, Feeding Uniformity, Parameter OptimizationAbstract
The de-trashing operation and uniform feeding of sugarcane stalks into the processing inlet are the important yet under-researched stages of mechanized harvesting. This study introduces a new Dual-Axis Rotary De-Trashing and Feeding Mechanism (DATFM) system that is proposed for medium capacity chopper harvesting machine used under dense tropical field conditions and analyzed. A coupled Discrete Element Method – Rigid Flexible Coupling (DEM – RFC) simulation model has been created in EDEM 2022 and ADAMS 2023 to capture the interactive behavior between the leaf-trash particles, flexible stalk elements and the rigid rotating rollers. Based on the kinematics and the force analysis, the key parameters that affect the performance of the de-trashing and feeding process (inter-roller gap width (G), primary roller rotational speed (n₁), secondary roller inclination angle (β₂), and roller surface groove depth (d)) were identified and optimized systematically by simulation evaluation. Under a forward harvesting speed of 0.60 m/s, the optimized DATFM used to remove trash, achieved 88.1% trash removal rate (TRR) and 2.8% stalk damage rate (SDR), and feeding uniformity index (FUI) was 0.83. The TRR was 18.6 percentage points higher than the original design while the SDR was 41.7 percentage points lower, and the FUI was 36.1 percentage points higher. One-way ANOVA was performed and found that there were statistically significant differences between all of the parameter levels (p < 0.01). The model, DEM–RFC, was found to be reliable in predicting its performance for TRR by the field trials conducted during three harvesting seasons in Maharashtra, India with a mean absolute simulation-to-field error of 4.12%. The results offer a mechanism-driven framework for DATFM parameter redesign that can be replicated, and further the sugarcane harvest equipment simulation knowledge base for the tropical regions.
Downloads
References
MiuP. I.Combine Harvesters: Theory, Modeling, and DesignBoca Raton, FL, USACRC Press201510.1201/b18852
DeleleS. R.WeiglerM. E.FrankeG.MellmannJ.Studying the solids and fluid flow in a rotary drum based on a multiphase model using the discrete element method (DEM)Powder Technology292260271201610.1016/j.powtec.2016.01.026
ZhangY.LiQ.LiuC.ZhaoF.LiT.ZhouJ.Discrete element simulation modeling method and parameters calibration of sugarcane leavesAgronomy1281796202210.3390/agronomy12081796
TestaC.Continuous and impact cutting in mechanized sugarcane harvest: Quality, losses and impuritiesAgriculture137202310.3390/agriculture13071329
MartinsM. B.Marques FilhoA. C.DrudiF. S.BortolheiroF. P. A. P.VendruscoloE. P.EsperanciniM. S. T.Economic efficiency of mechanized harvesting of sugarcane at different operating speedsSugar Tech232428432202110.1007/s12355-020-00910-2
de ToledoA.da SilvaR. P.FurlaniC. E. A.Quality of cut and basecutter blade configuration for the mechanized harvest of green sugarcaneScientia Agricola706384389201310.1590/S0103-90162013000600002
WangQ.ZhouG.HuangX.SongJ.XieD.ChenL.Experimental research on the effect of sugarcane stalk lifting height on the cutting breakage mechanism based on the sugarcane lifting-cutting system (SLS)Agriculture12122078202210.3390/agriculture12122078
ChristinaM.Climate, altitude, yield, and varieties drive lodging in sugarcane: A random forest approach to predict risk levels on a tropical islandEuropean Journal of Agronomy161202410.1016/j.eja.2024.127381
WangQ.ZhangQ.ZhangY.ZhouG.LiZ.ChenL.Lodged sugarcane/crop dividers interaction: Analysis of robotic sugarcane harvester in agriculture via a rigid-flexible coupled simulation methodActuators111202210.3390/act11010023
HuJ.Design and development of sugarcane top chopper and its field performanceSugar Tech23611921198202110.1007/s12355-021-00990-8
WangQ.BaiZ.LiZ.XieD.ChenL.WangH.Straw/spring teeth interaction analysis of baler picker in smart agriculture via an ADAMS-DEM coupled simulation methodMachines911296202110.3390/machines9110296
WangQ.JiangY.LiL.QinJ.ChenL.Performance analysis of a spring-tooth drum pickup of straw baler via coupling simulationInternational Journal of Agricultural and Biological Engineering144159165202110.25165/j.ijabe.20211404.6576
FagettiM.NazariM.ChoH.Coupled dynamics analysis and adaptive control of rigid-flexible vehicles with model uncertaintiesJournal of the Franklin Institute362202510.1016/j.jfranklin.2025.107774
KakavandM.ZhuZ. H.Rigid-flexible coupled dynamics and configuration stability of maneuverable space tether net under impact loadsActa Astronautica232114131202510.1016/j.actaastro.2025.02.031
WangQ.XuD.ZhuB.JiangC.QiaoY.LiH.YangR.Design and experimental research of a CFD-DEM coupled pelleted rice seeds UAV hole-sowing seed feeding deviceAgriculture165561202610.3390/agriculture16050561
XieL.WangJ.ChengS.ZengB.YangZ.Optimisation and finite element simulation of the chopping process for chopper sugarcane harvestingBiosystems Engineering1751626201810.1016/j.biosystemseng.2018.08.004
WangQ.ZhuB.JiangC.WangJ.YiK.Defect analysis and core-parameter optimization of a spiral sugarcane lifter based on rigid-flexible couplingAgriculture16101100202610.3390/agriculture16101100
AshrafT.MaqsoodM.Mechanizing sugarcane harvesting in India: A reviewCurrent Journal of Applied Science and Technology42478085202310.9734/cjast/2023/v42i474318
MengX.ZhangD.YangL.CuiT.ZhongH.QuX.Modeling soil-plant-machine dynamics using discrete element method: A reviewAgronomy1351260202310.3390/agronomy13051260
BaiJ.MaS.WangF.XingH.MaJ.HuJ.Field test and evaluation on crop dividers of sugarcane chopper harvesterInternational Journal of Agricultural and Biological Engineering141118122202110.25165/j.ijabe.20211401.5621
Published
How to Cite
Issue
Section
Copyright (c) 2026 Ahadov Akobir

This work is licensed under a Creative Commons Attribution 4.0 International License.