Perlas (Piezoelectric energy for residential lighting and advance solutions): an arduino uno-based piezoelectric energy harvesting system for residential lighting applications
Keywords:
Piezoelectric, Energy Harvesting, Sustainable Power, Residential Lighting, Mechanical Stress, Conversion, Renewable Energy SolutionsAbstract
This study explores the development and testing of a piezoelectric energy-harvesting prototype designed to convert mechanical stress from foot traffic into electrical power for residential lighting applications. With the increasing demand for sustainable energy solutions, piezoelectric sensors present a viable alternative for generating electricity from everyday activities. The prototype consists of piezoelectric sensors integrated into a flooring system, an Arduino Uno for energy tracking, a voltage regulator, and an energy storage component. A series of experiments were conducted to evaluate the system’s efficiency, focusing on the relationship between applied force and voltage output. The results revealed a strong positive correlation (r = 0.92) between mechanical stress and energy generation, indicating that increased force leads to higher voltage output. Additionally, an ANOVA test confirmed a statistically significant difference (p < 0.05) in energy output across varying pressure levels, demonstrating the effectiveness of the system in energy harvesting. The prototype successfully stored harvested energy and powered LED lights, validating its potential for practical applications. However, improvements in energy storage capacity and circuit efficiency are necessary for large-scale implementation. This study highlights the feasibility of integrating piezoelectric energy harvesting into residential settings, contributing to the advancement of sustainable and renewable energy solutions. Future research should explore optimization techniques, larger-scale applications, and economic feasibility assessments to enhance its viability for broader use.
Downloads
References
[1] 'Designing a system to generate electricity from usual surrounding motions through piezoelectric to run surveillance systems on the port', Sep. 2023.
[2] Azarnoush, O. A. Dambri, E. Ü. Karatop, D. Makrakis, and S. Cherkaoui, 'Simulation and performance evaluation of a bio-inspired nanogenerator for medical applications', IEEE Transactions on Biomedical Engineering, vol. 70, no. 9, pp. 2616-2623, 2023. doi.org/10.1109/TBME.2023.3260200
[3] M. Elhalwagy, M. Y. M. Ghoneem, and M. Elhadidi, 'Feasibility study for using piezoelectric energy harvesting floor in buildings' interior spaces', Energy Procedia, vol. 115, pp. 114-126, Jun. 2017. doi.org/10.1016/j.egypro.2017.05.012
[4] R. Jai Ganesh, D. B. Shanmugam, S. Munusamy, and T. Karthikeyan, 'Experimental study on footstep power generation system using piezoelectric sensor', Mater. Today, vol. 45, pp. 1633-1637, 2021. doi.org/10.1016/j.matpr.2020.08.474
[5] M. N. Hussain, M. R. Zaman, M. A. Halim, M. S. Ali, and M. Y. A. Khan, 'A Comprehensive Review of Renewable and Sustainable Energy Sources with Solar Photovoltaic Electricity Advancement in Bangladesh', Control Systems and Optimization Letters, vol. 2, no. 1, pp. 1-7, 2024. doi.org/10.59247/csol.v2i1.59
[6] M. J. B. Kabeyi and O. A. Olanrewaju, 'Sustainable energy transition for renewable and low carbon grid electricity generation and supply', Frontiers in Energy research, vol. 9, 2022. doi.org/10.3389/fenrg.2021.743114
[7] R. R. Moussa, W. S. E. Ismaeel, and M. M. Solban, 'Energy generation in public buildings using piezoelectric flooring tiles; A case study of a metro station', Sustain. Cities Soc., vol. 77, no. 103555, p. 103555, Feb. 2022. doi.org/10.1016/j.scs.2021.103555
[8] M. M. Solban, Department of Architecture Engineering, The British University in Egypt (BUE), El-Sherouk City, 11837, Egypt, R. R. Moussa, and Department of Architecture Engineering, The British University in Egypt (BUE), El-Sherouk City, 11837, Egypt, 'Investigating the potential of using human movements in energy harvesting by installing piezoelectric tiles in Egyptian public facilities', J. Eng. Res., vol. 9, no. 4A, Dec. 2021. doi.org/10.36909/jer.9517
[9] D. Suleiman and I. G. Abdulhamid, 'Piezoelectric energy harvesting floor mat for low power applications', International Research Journal of Modernization in Engineering Technology and Science, vol. 3, no. 12, pp. 118-124, Dec. 2021.
[10] N. Sezer and M. Koç, 'A comprehensive review on the state-of-the-art of piezoelectric energy harvesting', Nano Energy, vol. 80, no. 105567, p. 105567, Feb. 2021. doi.org/10.1016/j.nanoen.2020.105567
[11] N. Sezer and M. Koç, 'A comprehensive review on the state-of-the-art of piezoelectric energy harvesting', Nano Energy, vol. 80, no. 105567, p. 105567, Feb. 2021. doi.org/10.1016/j.nanoen.2020.105567
[12] P. Sirigireddy and P. B. Eladi, 'Design of novel piezoelectric energy harvester utilizing the force generated from human walking', Smart Materials and Structures, vol. 31, no. 3, 2022. doi.org/10.1088/1361-665X/ac4e52
[13] D. Yeboah, S. Abaidoo Quainoo, and A. W. Brew, 'Hybrid electricity generation using solar energy and kinetic energy of players' footsteps - a case study: Tarkwa Akoon soccer park, Ghana', Int. J. Ambient Energy, vol. 44, no. 1, pp. 2347-2361, Dec. 2023. doi.org/10.1080/01430750.2023.2235342
Published
How to Cite
Issue
Section
Copyright (c) 2025 Authors
This work is licensed under a Creative Commons Attribution 4.0 International License.
